Stanley Tools® 3 inch Multi-Bit Ratcheting Screwdriver, 10 Bits, Black/Yellow

Stanley Tools® 3 inch Multi-Bit Ratcheting Screwdriver, 10 Bits, Black/Yellow

Item # BOS68010

  • Contains 10 different bits.
  • Handle storage provides quick and easy access to bits.
  • Ergonomic, textured-finish handle achieves maximum torque with minimum effort.
  • Magnetic bit holder ensures speedy and secure bit changes.
  • Materials designed to resist corrosion, chipping and breaking for a long product life.
  • Includes a range of tips, including standard, Philips, Torx style to square for a precise fit.
  • Set includes 10 bits and bit storage system with #1 and #2 Philips, 3/16 in. and 1/4 in. slotted and T-15 and T-20 Torx® to accommodate a variety of jobs
Manufacturers Item #68-010
AssemblyRequired SmallPackage
Retail Price:
$34.14/KT

This 3 inch Multi-Bit Ratcheting Screwdriver includes 10 different bits to conquer an assortment of tasks. Bits conveniently store in the handle for quick and easy access on the job. The ergonomically designed handle offers comfort for your hand and maximum torque at the fastener head. The magnetic bit holder allows for speedy and secure bit changing with little effort. Designed to resist corrosion, chipping and breaking, this high-quality screwdriver is built to last. This set includes 10 standard, Phillips®, Pozi, Torx®, and square bits, as well as a handy, patented magnetic bit storage system.

Tool Type: Screwdriver Kit; Tip/Socket Type(s): Standard Bit; Phillips® Bit; Torx® Bit; Pozi Bit; Square Bit; Tip/Socket Size(s): 3/16"; 1/4"; #1 Phillips; #2 Phillips; T15 Torx®; T20 Torx®; #1 Pozi Bit; #2 Pozi Bit; #1 Square Bit; #2 Square Bit; Overall

  • Global Product Type Screwdrivers and Nut Drivers-Screwdriver Set
  • Tool Type Screwdriver Kit
  • Tip/Socket Type(s) Standard Bit; Phillips® Bit; Torx® Bit; Pozi Bit; Square Bit
  • Tip/Socket Size(s) 3/16"; 1/4"; #1 Phillips; #2 Phillips; T15 Torx®; T20 Torx®; #1 Pozi Bit; #2 Pozi Bit; #1 Square Bit; #2 Square Bit
  • Overall Length 10"
  • Tip/Socket Material Stainless Steel
  • Shaft/Shank Length 3"
  • Shaft/Shank Material Chrome
  • Shaft/Shank Finish Chrome
  • Handle Material Plastic
  • Handle Color Black/Yellow
  • Magnetic Tip Yes
  • Includes Handle; 3/16" Standard Bit; 1/4" Standard Bit; #1 Phillips® Bit; #2 Phillips® Bit; T15 Torx® Bit; T20 Torx® Bit; #1 Pozi Bit; #2 Pozi Bit; #1 Square Bit; #2 Square Bit; Storage Rack
  • Package Includes Storage Rack
  • Pre-Consumer Recycled Content Percent 0%
  • Post-Consumer Recycled Content Percent 0%
  • Total Recycled Content Percent 0%
  • Country of Origin TW
  • Carton Pack Quantity 8
  • Pack Quantity 0
  • UPC 076174680102
  • UNSPSC 27113200
2.9 / 5
11 Reviews
Stosh
06/04/2022 03:42 PM
Nice concept, horrible functionality
If you rarely need to change bits, this screwdriver is OK. The racketing function is nice. But keep a needle nose pliers handy to pry the heads out if you need to change.
Gathered from a customer while visiting stanleytools.com

ummeli
05/14/2022 03:16 AM
Twenty years and still working fine
I bought one of these twenty years ago after reading a positive review in the Carpenters Union magazine and it still works great. Was just thinking of buying another for my daughter since she's about to move out on her own.
Gathered from a customer while visiting stanleytools.com

dead
02/09/2022 01:58 PM
Not good
I bought this screw driver yesterday and i cannot get the bit out of the screw driver to change it to another one
Gathered from a customer while visiting stanleytools.com

Loretta
08/26/2020 10:08 PM
falls apart
I bought one of these for keeping in an area of the house where it would not be used very often. After about 10 uses, it fell apart and five tiny pieces came out of the piece where the barrel is coupled to the base. Stanley used to make good products.
Gathered from a customer while visiting stanleytools.com

pradeep
07/12/2020 11:54 AM
Bad design
very difficult to change the bits. Too impractical.
Gathered from a customer while visiting stanleytools.com

Ty B
06/25/2020 04:29 AM
Quality tool
[This review was collected as part of a promotion.] I bought this screwdriver about a year ago and I love it. I found myself reaching for it every time I had a small project where a big impact driver was too much.
Gathered from a customer while visiting stanleytools.com

DJason
04/21/2020 08:40 PM
Older version much better than the cheaper new ver
I have had these screwdrivers for Many years for servicing rental properties & general use and just LOVE them. The rubber is so comfortable and the ratcheting mechanisms & bit holder is great! No issues with any of them.... until the newer (more plasticy) version was released. I've had 2 of these, and I think BOTH of them just had the shaft fall right out, no pressure or anything. I can't even see how it could hold into the handle. Also the new ones have either too tight of an exterior bit holder, or it's MAGNATIZED- both very bad ideas (you can't get bits out anymore). Old model rocks, new model, bad. Stanley did replace them right away, but the hard plastic is not as comfortable as the older ones that were more rubbery. Hope this helps!
Gathered from a customer while visiting stanleytools.com

Matt7365
10/22/2019 09:53 PM
Heavy duty, well built!
[This review was collected as part of a promotion.] I bought the older version of the 68-010 years ago and liked it so much I bought several more so that I could have one at home, at work, one in each vehicle etc. The tool is well made and very sturdy, never any problems with the ratcheting mechanism. Excellent value! I've had these for many years and they all still work great!
Gathered from a customer while visiting stanleytools.com

Strummer
10/22/2019 05:16 PM
Saves your wrists and steps
[This review was collected as part of a promotion.] I bought my multi-bit ratcheting screwdriver about 15 years ago using a gift card i got when I retired. It is the best tool purchase I ever made. It is handy for virtually all household repairs as well as wood-working projects. And, in a pinch, it makes a good substitute for a drill driver if you forgot to bring that tool along. Having the right bit for any screw is a real time- and step- saver.
Gathered from a customer while visiting stanleytools.com

Isabel
05/12/2019 07:00 PM
Really Flimsy
I purchased a Stanley multi-head screwdriver less than 3 months ago and today it fell apart in my hands. It was always a but flimsy but for $16, I expected a but more. Very disappointed.
Gathered from a customer while visiting stanleytools.com